Tools, Tones and Toys for Guitarists
A new Stutter Fuzz / Ring Modulator by Freppo from Parasit Studio. You can find all info about this project and PCBs at http://www.parasitstudio.se/. To make sure this project is built correctly (for momentary or latching Stutter footswitch) you must follow his Build Document here.
Here is a layout for the DOD FX22 Vibro Thang (Vibrato / Phasor) 04/05 Layout Updated: LM358 pin 4 and the 18K resistor from the bottom LM13600 pin 9 were connected to V+ instead of ground.
Here is the Menatone Pig overdrive. There are two layouts: one with trimpots to help bias the JFets (would start at 9V) and one with fixed resistors (probably need to test different values to bias the JFets properly). I’ve also added a charge pump (it works at 18V). You can find the original thread from … Read more
Brian’s take on John Hollis Easyvibe. You can find his 1590G size boards on his website. Check his original notes here for more infos on how to build this project! Here is another version with Mark Hammer’s anti-ticking mod as suggested by Ciaran:
A new release by Fredrik (Freppo) from Parasit Studio. You can find all infos and pcb on his website. There is also a layout for his new Sentient Machine on our Forum/Contributions section. Here are two videos for v. 2.0 and v.1 to give you an idea until a new video will be recorded: You … Read more
This is a single channel version of Sunn Beta Bass & Lead Preamps. You can find the original FSB thread here. There are two different sets of caps depending on which version you want to build. You could use Mark’s Bipolar Voltage Converter if you want: http://tagboardeffects.blogspot.fr/2014/01/bipolar-voltage-converter.html You could also use this external board to … Read more
Madbean’s great new project based on Earthquaker Devices Sea Machine. Original infos available here. 17/07/2016 Layout updated! Changed 33n cap to 3n3 and 10k resistor from PT2399’s pin 14 back to 1K.
